46 Answers
46 Answers
-
RYB means Red, Yellow and Blue which indicate the phaseModal content
-
RYB are 3 phase of transmission and distribution by colour code red ; yellow ;blueModal content
-
YesModal content
-
It's mean r for red wire and y for Yellow and b for blue wire these all are the phase wire of electrical supply these wire also called the hot wiresModal content
-
three phases in electrical system designated as red, yellow, blue. phase sequence is ryb if r attains peak wrt counter clockwise direction followed by y phase 120 degree later and b phase 240 degree later than r phaseModal content
-
RYB refers to the subtractive color model using red, yellow, and blue as primary colors, commonly used in art and design.Modal content
-
Red yellow blueModal content
-
Red Yellow Blue Three phases of Power supplyModal content
-
Rub is used in delta or star connection rub are three phases.Modal content
-
RYB kya hota haiModal content
-
Red, yellow,blue colour code in 3 phase transmission systemModal content
-
RYB red, yellow and blue it represents colour of wire which is used in three phase lineModal content
-
Red Yellow and Blue are standard colours designed by as per IS standards for 3 phase systemModal content
-
in three phase wiring R means red Y means yellow B means blueModal content
-
R Y B is three wire, R=red, Y= yellow , or B = blue, RYB wire use in 3-phase AC supplyModal content
-
3 phase are denoted by three different letters.It is denoted by R Y BModal content
-
R,Y,B is the colour of wire which is use to represent the phase wireModal content
-
RYB simply stands for Red, yellow and Blue respectively in a three phase electricalsystem. In a three phase electrical system, the three phases are separated by an angle of 120 degrees and each phase is given a specific colour, i.e. R,Y and B for the phases to be identified.Modal content
-
RYB simply stands for Red, yellow and Blue respectively in a three phase electrical system. In a three phase electrical system, the three phases are separated by an angle of 120 degrees and each phase is given a specific colour, i.e. R,Y and B for the phases to be identified.Modal content
View all vote's
Other Related Discussions
-
Why 3ph voltages are named as Red, Yellow & Blue?
-
How can I step-up 12V DC to 2000V DC?
-
Any type of general questions related with electric engineering
-
what iz residual flux? explain differential current?if power frequency of Power Transformer increased above 50Hertz then increases
-
how many circuit bkr are there
-
How to get battery percentage without fuel gauge?I have only voltage and current values
-
Can anyone tell me which stream should i prefer for doing my MS abroad??
-
what is difference between alternator and generator?
-
How the gap between generation and demand can be reduced?
-
The node voltage method is based on Kirchhoff's voltage law.
Didn't get the answer.
Contact people of Talent-Electrical Engineering directly by clicking here
