Indranil Bose | Youth4work

Indranil Bose
Graduate Engineer
Chennai, Tamil Nadu, India
Industrial Automation Power System Electrical Engineering
VIT-Vellore Institute of Technology

Profile Snapshot

Indranil is based out of Chennai & has studied Other, BE BTech-Bachelor of Engineering or Technology from Year 2013-2017 in VIT-Vellore Institute of Technology, VIT University.

Indranil Bose is Skilled in Industrial Automation, Power System, Electrical Engineering and other talents.

Profile Snapshot

Indranil is based out of Chennai & has studied Other, BE BTech-Bachelor of Engineering or Technology from Year 2013-2017 in VIT-Vellore Institute of Technology, VIT University.

Indranil Bose is Skilled in Industrial Automation, Power System, Electrical Engineering and other talents.

Talents

Electrical Engineering

... among 0 users in Chennai

…

among 0 users worldwide
Team Work

... among 0 users in Chennai

…

among 0 users worldwide
Power System

... among 0 users in Chennai

…

among 0 users worldwide
Multi Tasking

... among 0 users in Chennai

…

among 0 users worldwide

Complete Talent Profile »

Professional Path

Advance diploma in Industrial Automation

SMEC LABS Internships

Jun-2016 To Jul-2016 1 months

Learning basics of PLC SCADA, ladder programming communication between PLC SCADA and PC systems VFD HMI

summer trainee

Department of Atomic Energy Internships

Jun-2015 To Jul-2015 1 months

study of 100 MW solar power plant,protection working and maintainence,220kv switch yard, transformer, generator,motors

» 2 Projects

POWER FACTOR CORRECTION WITH PLC BASED SCADA

Student at VIT-Vellore Institute of Technology

Jan-2017 to May-2017

It is important to correct power factor as lower power factor causes reactive power to oscillate between source and load which causes high losses. In order to reduce this power factor for the loads can be compensated with the capacitor as most of the loads are inductive loads. The objective of this project is to study the effect of different types of loads on the power factor of the system and to provide reactive power compensation for power factor correction. A power system prototype with resistive and inductive load is designed for study and implementation. Analytical calculations for power factor correction are done for fixed ratings of different combinations of load. Microcontroller is used to display the load current and voltage for on field purpose. PLC is used for data acquisition, load control and capacitor switching from the control room .SCADA is used for on screen monitoring and control of loads. Power factor correction is done using capacitor switching by programming in PLC

Optimization Techniques Based Adaptive Overcurrent Protection in Microgrids

Student at VIT-Vellore Institute of Technology

Jul-2015 to Nov-2015

Microgrids are the solution to growing power requirement of consumers at distribution level. The distributed generators (DGs) and loads in microgrid are connected or disconnected at any instant of time, resulting in reconfiguration of microgrid network. Thus conventional protection schemes are not applicable to microgrids. In this paper, the optimization of relay settings in microgrid is done using dual simplex algorithm. The significance of adaptive protection scheme is highlighted and the hardware model of Arduino based overcurrent relay is realized, tested and validated for microgrid application.

Qualifications

Vellore Institute of Technology

Bachelor of Engineering or Technology Other

2013-2017

95%

Contact details are visible to employers. Log in or sign up as an employer

Find a different Indranil