Profile Snapshot
Sandeep is based out of Bangalore & has studied Thermal, ME MTech-Master of Engineering or Technology from Year 2014-2016 in MVJCE-M V J College of Engineering, Vishveshwaraya Technological University.
Sandeep Jat is Skilled in Mechanical Engineering, CATIA, Database Analysis and other talents.
Talents
-
Database Analysis... among 0 users in Bangalore…among 0 users worldwide -
CATIA... among 0 users in Bangalore…among 0 users worldwide -
Mechanical Engineering... among 0 users in Bangalore…among 0 users worldwide41.45percentile among worldwide users
Professional Path
Project Scientist
CSIR NAL, Bangalore
Full Time
May-2017 To
Jul-2017
2 months
- Project : Validation of Star-CCM+ For Hypersonic Flight Conditions Work Description ? Performing CFD simulation using Star-CCM+ over a 70? sweep slab delta wing ? Validation was performed with the available experimental results for the two geometry (Sharp Nose & Blunt Nose) over two flight conditions i.e Mach number (6.8M & 9.6M) ? Results obtained from Star-CCM+ code matching very well with NASA’s experimental results
Project Scientist
CSIR NAL, Bangalore
Full Time
May-2017 To
present
9 years 4 months
- Project : Validation of Star-CCM+ For Hypersonic Flight Conditions Work Description ? Performing CFD simulation using Star-CCM+ over a 70? sweep slab delta wing ? Validation was performed with the available experimental results for the two geometry (Sharp Nose & Blunt Nose) over two flight conditions i.e Mach number (6.8M & 9.6M) ? Results obtained from Star-CCM+ code matching very well with NASA’s experimental results
Application Engineer - Thermal
MaxSoft India Pvt Ltd, Bangalore
Full Time
Jul-2016 To
Feb-2017
7 months
- Pre and Post Sale Technical Support For Simulation Software ( KULI ) ? KULI - Vehicle Thermal Energy Management, 1-D Simulation Software ( Engine Cooling, HVAC , Hybrid Vehicle)
Project Trainee
GTRE DRDO, Bangalore
Internships
Jun-2015 To
May-2016
11 months
- Thesis : “Estimation of Bird Trajectory along the flow field of an Aircraft Intake Duct”. Evolved the method in the Star-CCM+ CFD Tool to simulate an Unsteady case having mesh movement (6-DOF) for an internal field flow ? Six Degree of Freedom CFD simulation along with Chimera mesh (Overset mesh technique used in Star-CCM+ ) was used to track the movement of the bird ? Generated an automated Trimmed Mesh for both flow domain (Intake duct domain and Overset flow domain around Bird) ? The Steady State Simulation was performed on three different flight conditions i.e. for a low Mach number (0.4 Mach), For a take-off condition (0.8 Mach) and For a flight condition of 0.5 Km above the ground level (0.9 Mach). ? Parametric Study was performed using Time-Step study and Mesh study ? Results were obtained for various Bird position and its orientation ? Validation case was performed over NACA-Type S-Duct Inlet using Star-CCM+.
- Project : “Flow Analysis of Three Stage FAN”. Work Description ? Conducted the CFD analysis on Three Stage LP Compressor of a Turbo Fan Engine (TFE) ? An Automated Structural Mesh was generated using Numeca’s AutoGrid Tool ? CFD analysis was performed on design point as well as at various off design conditions using Numeca’s FINE Turbo Tool. ? Pressure and Temperature plots along with the blade loading plots were extracted using Numeca’s CFView Post Processing Tool ? Performance maps were generated and line of compressor stall was obtained
Project Graduate Trainee
CSIR NAL, Bangalore
Full Time
Aug-2013 To
Aug-2014
1 years
- Project : Structural & CFD Analysis of an Axial Flow Turbine Work Description ? Performed structured grid generation & CFD simulation using NUMECA’s AutoGrid5 & Fine-Turbo respectively for various configurations of a two stage axial flow contra-rotating turbine module of a small turbo-fan engine (STFE) ? Performed CFD simulations of the two stage axial flow contra-rotating turbine using ANSYS-CFX solvers, wherein the grid generation was carried out in ICEM-CFD ? Developed scripts and macros for automated data extraction and post processing from the result files in ANSYS-CFX & NUMECA CFView, thereby accelerating the analysis process ? Carried out detailed performance analysis for the two stage axial flow contra-rotating turbine. ? Carried out modeling of propeller and axial turbine components using SOLIDWORKS and CATIAV5 and thereby performed weight estimation of individual components ? Performed detailed stress analysis of various turbine blade rotor disk and propeller blade.
Qualifications
M V J College of Engineering
Master of Engineering or Technology Thermal
2014-2016
71%
South East Asian College of Engineering and Technology
Bachelor of Engineering or Technology Mechanical Engineering
2009-2013
70%
Extra-Curricular Interests
- Runners up in Cricket U-19 (Event in KVS Regional sports meet
2007). - Winners in Cricket U-16 (Event in KVS Regional sports meet
2006).
- Winners in Drama (SEA ZONS-2011). - Runners up in Cricket U-19 (Event in KVS Regional sports meet
2007). - Winners in Cricket U-16 (Event in KVS Regional sports meet
2006). - Was elected as the house captain in School.
My Story
I believe in, 'Grow Each Day'. I have more than 3 Years of industrial experience, out of which 1.9 is on job experience. I have completed my Masters ( MTech) in Thermal Power Engineering and Bachelors (BE) in Mechanical Engineering. I want to work in R&D sector where I can work with engineering simulation software.
Contact details are visible to employers.
Log in or sign up as an employer
